lowel
stands
lowel
stands poles
lowel
clamps and mounts
lowel
booms and rigs
lowel



lowel

Clamps & Mounts

lowel
lowel
lowel reflectors

Trying to figure out how to get that accent light in the right place while keeping its stand out of the shot? Lowel Clamps & Mounts extend the creative possibilities of any lighting kit. They allow innovative mounting solutions to the kind of light placement issues that can pop up when working in a wide variety of locations. Well made and dependable, they increase your lighting options.

lowel

Clamps & Mounts

Space-clamp

This clamp locks onto posts, beams and objects with spans from 25" to 8 to support one or more lights, flags, etc. The bar, made of high-strength aluminum aircraft alloy, interlocks without tools to adjust to various widths. It can also reverse and jack out to clamp between objects (not recom-mended with two or more bars interlocked). Stud Bracket locks onto any part of the arm. Space Clamp also acccepts Tota-tilter and Lobo for a variety of accessories.

Large Space-clamp

Code: SC-10
Size: 27.25" (69.2 cm) long
Weight: 1.5 lbs (680 g)
Complete with Large Bar, 2 Clamping Arms, Stud Bracket, 2 Knobs.
US List Price: $79.50

Large Bar

Code: SC-15
Size: 27.25" (69.2 cm) long
Weight: 8 oz (227 g)
US List Price: $62.50

Clamping Arm (1)

Code: SC-35
Weight: 6 oz (170 g)
US List Price: $18.00

Stud Bracket

Code: Code: SC-30
Weight: 4 oz (113 g)
US List Price: $22.00

Tota-clamp

Code: T1-30
Weight: 4 oz (113 g)
Supports medium weight lights and accessories on a 5/8" (1.59 cm) stud that pivots and locks in two positions. The clamp attaches securely to stands, pipes, shelves, etc. up to 1 7/8" (4.8 cm) diameter and also accepts two Flexi-shafts with Flags or Flectors. The stud has a tapped hole to accept accessories that mount with 1/4-20 bolts. Works with Lobo, Tota-tilter, Grip and Interlink.
US List Price: $30.00

Tota-mount

Code: T1-32
Weight: 10 oz (284 g)
Hangs, open or closed, on doortops. Gaffer-tapes to windows and many wall surfaces to support small lights, such as ViP and Tota/Omni, when stands are unavailable or in the way. With 5/8" (1.59 cm) stud. Folds for storage and travel.
US List Price: $44.50

Big-foot & Scissor-mount

Code: CM-31
Weight: 11 oz. (170 g)
Lowel Big-foot converts a scissor-mount or stud with 1/4-20 threaded hole into an instant support for various lights. The broad base provides stability on the floor.
US List Price: $40.50

Big-foot TM

Code: CM-30
Size: 7" X 10" X 1/4"
Weight: 11 oz (311 g)
Plate only without scissor-mount.
US List Price: $30.00

Scissor-mount (2)

Code: CM-20
Weight: 9 oz (250 g)
Attaches small lights and accessories to grid of dropped-ceilings in offices and other areas. Use Gridlock (CM-21) with Pro-light. (Set of 2).
US List Price: $26.00

Lobo (2)

Code: F1-30
Weight: 10 oz (284 g)
Positions Maxa-mount, Lobo Arm, frame-ups, flags, umbrellas, etc. Attaches to the top or shaft of stands, to the Space Clamp bar, to any 5/8" (1.59 cm) stud or to pipes up to 1 1/4" (3.2 cm) diameter. One large knob controls 360°, multi-axis rotation with precise clamping.
U.S. Patent: 4616384.
US List Price: $29.00

Lobo Arm

Code: F1-40
Weight: 3 oz (85 g)
Size: 22" (55.9 cm) shaft
With 5/8" (1.59 cm) stud. Used with Lobo or Grip; extends, articulates and booms small lights, reflectors, etc.
US List Price: $18.50

Lobo Arm & Lobo

Code: F1-41
Weight: 13 oz (370 g)
US List Price: $41.50

Safety Cable (3)

Code: CM-50
Weight: 2 oz (57 g)
Size: 34" (86.4 cm)
Braided stainless-steel cable adds security to lights and accessories that are attached to overhead pipes, beams, dropped-ceiling grids, etc. (Set of 3).
US List Price: $24.50

Maxa-mount

Code: CM-10
Weight: 7 oz (198 g)
Size: 27.75" (70.5 cm) long; 3/8" (1 cm) shaft
Supports (with Gaffer-tape or double-faced tape) light reflecting or control panels, props and products. Tilts, pans and rotates; accepts a Lowel Weight for balance. Mounts on a stand with Lobo or Grip to make a mini boom. Used with seamless paper, it floats props in "limbo". 5/8 (1.59 cm) stud.
US List Price: $32.50

Lobo & Maxa-mount

Code: CM-11
Weight: 17 oz (382 g)
US List Price: $61.50

Tota-tilter

Code: T1-36
Weight: 4 oz (113 g)
A constant tension tilt bracket for mounting Lightflectors, small still cameras, and accessories. Has a 1/4-20 knurled screw. Fits on 5/8" (1.59 cm) or smaller stud; accepts two Flexi-shafts.
US List Price: $37.00

Missing Link TM

Code: ML-10
Weight: 6 oz (170 g)
This versatile mounting device features a double articulating female fitting which provides increased flexibility when positioning small lights, flags, reflectors, poles, etc. It can be used in combination with a wide variety of Lowel accessories. Based on a design by Canadian videographer Peter Warren. Combines with ML-12 & ML-13 stud-mounted Spring Clamps for added versatility.
US Patent: 6073897
US List Price: $54.00

Small Spring Clamp (5/8" stud)

Code: Code: ML-12

Weight: 3.5 oz (99 g)
US List Price: $16.00

Large Spring Clamp (5/8" stud)

Code: Code: ML-13

Weight: 6.5 oz (185 g)
US List Price: $19.00

Missing Link & Small Spring Clamp

Code: Code: ML-16
Weight: 9.5 oz (269 g)
US List Price: $64.50

Missing Link & Large Spring Clamp

Code: Code: ML-17
Weight: 12.5 oz (355 g)
US List Price: $68.00

Double Male Stud

Code: K1-11
Weight: 24 oz (113 g)
Stud with two 5/8" (1.59 cm) ends; one end with 1/4-20 female threaded hole. Works with Missing Link to extend and articulate stands, poles, Scissor-mount. Also works with Grip. (Supplied as an integral part of Interlink.)
US List Price: $13.00

Screw-in Stud (2)

Code: LSS
Weight: 4 oz (113 g)
Standard 5/8" (16 mm) mounting stud with safety undercut. Screws into wooden surfaces such as the top of studio sets to support small lights, flags, reflectors, etc. (Set of 2).
US List Price: $15.00

Tota-daptor

Code: T1-35
Weight: 4 oz (113 g)
Stacks multiple Tota-lights; converts under-sized stands to 5/8" (1.59 cm). Also accepts two Flexi-shafts with Flags or Flectors.
US List Price: $25.50

Grip

Code: KG
Weight: 1.75 lbs (794 g)
This versatile heavy-duty clamp attaches to stands, poles, pipes, 2" x 4"s etc. to support lights with Interlink, or Double Male Stud; makes a boom out of Stand and Pole; works with Space Clamp, Maxa-mount. Tilts 180°; pans 360° and locks securely.
US List Price: $55.50

Interlink

Code: K1-10
Weight: 1.75 lbs (794 g)
Interconnects various Lowel components. Adds multiple mounting positions; joins two Lowel Poles (male or female ends) in a straight line or at right angles (90°). Both studs are removable and have a 1/4-20 threaded hole to simplify mounting accessories with 1/4-20 bolts.
US List Price: $32.50


[top]

LOWEL SITE MAP