lowel
systems
lowel
led
lowel
Pro Power LED
lowel
Prime Location LED
lowel
Blender
lowel
prime LED
lowel
GL-1
lowel
tungsten
lowel
Rifa
lowel
Tota
lowel
Omni
lowel
ViP Pro-light
lowel
ViP I and Id
lowel
ViP I and Id
lowel
DP
lowel
L-light
lowel
fluorescent
lowel
fluo-tec
lowel
e-studio
lowel
caselight
lowel
scandles
lowel
ego
lowel
Rifa
lowel
softcore
lowel
trio
lowel
studio
lowel
prime LED
lowel
Fluo Tec
lowel
e-studio
lowel



lowel

Lowel Prime™ LED -- Technical Comparison

> Go to main Lowel Prime LED page
lowel
Lowel Prime LED in use
lowel

Technical Data

Housing material: Aluminum thickness 0.062" formed / welded.
Finish: Black matte paint.
Mounting options: All units supplied with standard clamp & Safety Cable, and Female Standfitting.

DMX & Control Features

DMX addressing: switchless, intelligent addressing, on unit, channels 1-512
Mode functions:
  • DIMM intensity level
  • RUN slave DMX control
  • DMX addressing
  • SET user control lock
Dimming options: Manual or via DMX

Electrical: Auto-setting 100-240V, All Models

Nominal input voltage:
  • USA / Canada, 110-120 VAC 50/60Hz
  • Worldwide, 100-240VAC 60Hz
Power cord: All units supplied with 10' AC U-ground plug standard, unswitched cable. Domestic (USA) models include 16' switched cable for location use.
Fuse protection: All units IEC with integral user replaceable 5 x 20 mm fuse (see chart for specific model fuse).

Power Consumption, All Models

ModelInput VoltageWattageNominal CurrentPeak CurrentFuse
Prime LED 200 (Daylight or Tungsten model) 120VAC 85W 0.714A 0.97A 3A/250V (USA/Canada)
Prime LED 200 (Daylight or Tungsten model) 220VAC 85W 0.403A 0.610A 3A/250V (Worldwide)
Prime LED 400 (Daylight or Tungsten model) 120 VAC 135W 1.076A 1.5A 3A/250V (USA/Canada)
Prime LED 400 (Daylight or Tungsten model) 220 VAC 135W 0.619A 0.92A 3A/250V (Worldwide)
Prime LED 800 (Daylight or Tungsten model) 120 VAC 210W 1.76A 2.4A 3.15A/250V USA/Canada)
Prime LED 800 (Daylight or Tungsten model) 220 VAC 210W 0.94A 1.46A 3.15A/250V (Worldwide)

Prime 200 Amperage: 0.97 Amps at 120 Volts. 0.610 Amps at 220 Volts
Prime 400 Amperage: 1.5 Amps at 120 Volts. 0.92 Amps at 220 Volts
Prime 800 Amperage: 2.4 Amps at 120 Volts. 1.46 Amps at 220 Volts

Agency Approvals


Conforms to UL STD. 1573
Certified to CSA STD. C22.2 No. 16 6.

Warranty

Lowel-Light warrants that Lowel Prime LED fixtures under normal use in accordance with operating instructions, will perform to the specifications published by Lowel-Light at the time of purchase, for two (2) years, from the date of purchase by the consumer. In the event of a defect reported by the consumer within the applicable time period, if any, Lowel-Light will, at its option, replace or repair the defective merchandise at no charge to the consumer for either parts or labor.
As part of its policy of continuous research and product development, Lowel-Light reserves the right to change or withdraw specifications without prior notice.




[top]

LOWEL SITE MAP