lowel
systems
lowel
led
lowel
Pro Power LED
lowel
Prime Location LED
lowel
Blender
lowel
prime LED
lowel
GL-1
lowel
tungsten
lowel
Rifa
lowel
Tota
lowel
Omni
lowel
ViP Pro-light
lowel
ViP I and Id
lowel
ViP I and Id
lowel
DP
lowel
L-light
lowel
fluorescent
lowel
fluo-tec
lowel
e-studio
lowel
caselight
lowel
scandles
lowel
ego
lowel
Rifa
lowel
softcore
lowel
trio
lowel
studio
lowel
prime LED
lowel
Fluo Tec
lowel
e-studio
lowel



lowel

ViP Pro-light

> > view the V-light
lowel
vip pro-light

With its high intensity #2 Reflector & Prismatic Glass, the tiny focusable Pro-light is more efficient than a mini-fresnel of equal wattage. It gives an exquisite even light, with fresnel-like shadow quality, evenly dispersed flood, and a uniform spot with significant barndoor cut.

Used with today's more light sensitive digital cameras & filmstocks, it's compact size makes it the perfect low-level key or accent light, fill light (with diffusion), or back-light for interviews & other small shooting-areas. In addition to a wide variety of customizing & control accessories, its versatility can be increased by adding a DC adapter cable & swapping its bulb for battery operation. Replace the Prismatic Glass with Clear Safety Glass for a non-focusing super-spot in special use situations.

The Pro-light is also now available in a dedicated CE approved 230v Euro model. Pro-light's AC cable has been updated with an IEC connector.

  • Multi-use, tungsten halogen source.
  • Focus range-5:1 with 200W FVL lamp.
  • Watts: 250 & 125 at 120v,200 at 30v, 100 & 50 at 12v. 230 & 300 at 230v
  • Tilting: 160°, adjustable, constant-tension, one-handed, no-yoke tilting.

Pro-light Controls

Pro & i Upgrades & Front Housing

iP Retrofit Kit

Code: iP-14
Weight:
2 oz (56 g)
High intensity #2 Reflector
(iP-17) & Prismatic Glass (iP-52). Use to upgrade earlier Pro & i-lights.
US List Price: $19.50

Clear Safety Glass

Code: iP-49
When used with #2 Reflector, becomes a non-focusing high intensity spot.
US List Price: $11.50

#2 Reflector with front housing & clear Safety Glass

Code: iP2-19
With front housing & clear safety glass. For non-focusing spot only.
US List Price: $76.50
Pro-light Front Housing

Code: iP2-18
Upgraded Front housing, to allow use of 235 watt 230v lamp (GLF/P44). With installed #2 reflector & Prismatic Glass, supplied with upgraded (4/2003) Pro-light (P2-10) & (P2-10CE)
US List Price: $76.00

Pro & i Focus-knob Extension

Code: iP-35
Weight: 1 oz (28 g)
This handle snaps onto the focus knob on Pro and i-lights for left-hand focusing in on-camera news work.
US List Price: $9.50

Pro & i Light Controls

4-way Barndoor

Code: iP-20
Weight: 7 oz (195 g)
Barndoor Frame with two expandable rectangular leaves, two expandable triangular leaves. Accepts swing-in accessories. Rotates 360°.
US List Price: $45.50

2-way Barndoor

Code: iP-25
Weight: 4 oz (113 g)
Barndoor Frame with two removable Non-expandable Clip-on Leaves (iP-24). Frame accepts swing-in accessories and additional leaves. Rotates 360°.
US List Price: $30.00

Barndoor Frame

Code: iP-21
Weight: 2 oz (57 g)
Barndoor Frame only, accepts swing-in accessories, and/or leaves. Rotates 360°.
US List Price: $15.50

Expandable Rectangular Leaf

Code: iP-22
Weight: 1 oz (28 g)
Changes from small to large rectangle as needed, and can be attached to, or removed from Barndoor Frame.
US List Price: $12.50

Expandable Triangular Leaf

Code: iP-23
Weight: 1 oz (28 g)
Changes from triangular to square shape as needed and can be attached to, or removed from, Barndoor Frame.
US List Price: $12.50

Non-expandable Clip-on Leaf

Code: iP-24
Weight: 1 oz (28 g)
Rectangular leaf easily clips on to Barndoor Frame.
US List Price: $10.50

Gel-Jawz

Code: CL-15
Weight: 2 oz (56 g)
Package of eight clips. Attach to barndoor leaves to hold gels.
US List Price: $15.00

Swing-in Accessory Holder

Code: iP-30
Weight: 1 oz (28 g)
Accessories can be changed in holders. However, for fast or frequent changes, each should have its own holder. Up to three holders attach to the Pro and i-light Barndoor Frame, for use one-at-a-time.
US List Price: $16.50

Pro & i Gel Frame

Code: iP-40
Weight: 2 oz (56 g)
Holds 5 x 6" gels. Collapses for storage like Tota-frame.
US List Price: $22.00

Pro & i Gels (5)

Code: see description
Size:5 x 6" (12.52 x 15.25 cm) sheets Day Blue (iP-70); ND 3 (iP-71); Frost (iP-72); Booster Blue (iP-73); Assorted<3 Day Blue, 1 Frost, 1 ND 3 (iP-78).
US List Price: $8.50

Snoot

Code: iP-53
Weight: 4 oz (113 g)
Fits directly on the light. Produces a reduced, soft-edged circle of light. A Barndoor Frame fits on the front, if needed. US List Price: $62.50

Swing-in Accessories

Weight with holder: 2 oz (57 g)

Diffused Glass

Softens light, creates gentler, more flattering, but less dramatic, highlights and shadows. Light loss approx. 40% in flood.
Without Holder
iP-50
US List Price: $15.00
With Holder
iP-50H
US List Price: $26.50

Dichroic Filter

Converts 3200°K light to average daylight. Light loss approximately one stop.
Without Holder
iP-51
US List Price: $42.50
With Holder
iP-51H
US List Price: $56.50

Full Scrim

Stainless-steel screen reduces light by approximately one stop. Unlike the Diffused Glass (or Frost Gel on Tota-frame) it will not diffuse or soften high-lights and shadows.
Without Holder
iP-54
US List Price: $6.50
With Holder
iP-54H
US List Price: $18.50

Half Scrim

Stainless-steel screen covers half of the light and rotates 360° to reduce the light on any part of the subject or foreground that is too bright.
Without Holder
iP-55
US List Price: $6.50
With Holder
iP-55H
US List Price: $18.50

Graduated Scrim

Stainless-steel screen sections reduce light more subtly and more completely than the Half Scrim. Rotates 360°. Useful to control subjects that become too bright as they approach a light, and fall-off on walls and subjects.
Without Holder
iP-56
US List Price: $9.50
With Holder
iP-56H
US List Price: $22.00

iP Prismatic Glass

Use in Swing-in holder with Clear Glass in front housing for quick change from super spot to focusable.
Without Holder
iP-52
US List Price: $12.00
With Holder
iP-52H
US List Price: $25.00

ViP Light Controls

Flag-link

Code: ViP-50
Weight: 1 oz (28 g)
Attaches to ViP lights. Accepts one Flexi-shaft.
US List Price: $9.50

Tota-tatch

Code: T1-34
Weight: 3.5 oz (98 g)
Attaches to stands, shelves, tripods, etc. Accepts one Flexi-shaft.
US List Price: $18.50

Flexi-shaft (2)

Code: T1-50
Size: 16" (40.65 cm)
Weight: 4 oz (113 g)
Flexible arm snaps onto Flag-link, Tota-tatch, or Tota-clamp and positions a Tota-flag or Tota-flector. (Pkg of 2).
US List Price: $37.50

Tota-flag

Code: T1-52
Size: 8 x 12" (20.3 x 30.5 cm)
Weight: 4 oz (113 g)
Black aluminum panel attaches to a Flexi-shaft for shadowing subject, background or lens.
US List Price: $29.00

Tota-brella

Standard/Silver

Code: T1-25
Weight: 8 oz (227 g)
Size: 27" (68.6 cm) open, 19" (48.3 cm) closed.
Locks directly into all ViP lights to convert to small softlights. Recommended primarily for the V-light.
US List Price: $34.00
Special/White

Code: T1-26
Same as above with extremely soft, white reflective surface.
US List Price: $29.00

Tota-frame

Code: T1-20
Weight: 6 oz (170 g)
Size: Folded 12 x 1 x 1"
(30.5 x 2.5 x 2.5 cm)
Holds 10 x 12" (25.4 x 30.5 cm) gels. Locks directly into V-light, pans and tilts with the light. Also fits Pro & i lights.
US List Price: $33.50

Tota Gels (5)

Size: 10 x 12" (25.4 x 30.5 cm) sheets
(Pkg of 5) Day Blue (T1-70); ND 3 (T1-71); Frost (T1-72); Assorted—3 Day Blue, 1 Frost, 1 ND 3 (T1-78).
US List Price: $19.00

Tota/Omni Gel File

Code: GF-10
Size: 11 x 13" (27.9 x 33 cm)
Weight: 9 oz (255 g)
Accepts 10 x 12" gels for Tota/Omni Gel frame.
US List Price: $26.00


[top]

LOWEL SITE MAP